Lucian Angelescu Complete Curriculum Vitae

RÉSUMÉ

Name :	Lucian Angelescu
Nationality :	Romanian
Residence :	12 Signal Hill Circle,
	Calgary, Alberta T3H 2H7
	Canada

Fax/Phone :	+1 (403) 243-5247

E-Mail Address :	angeles@cadvision.com
Languages :	English and Romanian (Fluent).


Education :	Graduate of Oil and Gas University,
	Bucharest, Romania,
	Petroleum Engineering degree,
	1985.

SUMMARY:

The writer has over 15 years experience in the oil and gas industry; more than 7 of which have been as a drilling fluids engineer. He is qualified to bring a structured, client tailored sales philosophy, based on solid technical expertise, to your company. He has achieved outstanding results in different countries with various clients by increasing sales from 200% to 300% during the period he coordinated them.

His clients have included Shell, Amoco, Texaco, Mobil and Petro-Canada; clients whose needs were met or exceeded.

Having worked in sensitive offshore areas such as Eastern Canada, the Mediterranean Sea and along the coast of Israel the writer has a sound working knowledge of the problems connected with environmental protection. He has worked in these environmentally sensitive areas, in water depths from 800 to 900 meters, with oil-based and synthetic drilling fluids.

He is qualified to run various types of mud systems including Salt Saturated, Lime, Gyp, KCl, KCl Polymer, PolyPlus, High Temperature, Oil Based and Synthetic Based drilling fluids.

AVAILABILITY:

Please use any "Contact Lucian" link to send an e-mail to enquire about availability.

PROFESSIONAL HIGHLIGHTS:

October 2000 to Present

Consultant drilling fluids engineer on semi-submersibles operating off the east coast of Canada.

January 2000 to September 2000

Sales drilling fluids engineer, M-I Drilling Fluids Canada Inc.

Offshore operations on the semi-submersible "Henry Goodrich" for the Terra Nova Alliance operating in the Atlantic Ocean.

Developed client relations, focused on drilling fluids programs and provided optimum technical
and cost effective solutions.
Analyzed chemical and physical properties of drilling fluids.
Prepared daily drilling fluid reports and environmental reports.
Checked and took all the necessary measures for keeping the "Synthetic on Cuttings" below
the maximum acceptable value of 15%.
Supervised all activities related to drilling fluids, from the safety and environmental point of view.
Ensured optimum stock of chemicals in accordance with flow of drilling operations and maximum
load permit for semi-submersible rigs.
Performed physical inventories, ordered new chemicals, charged the clients for chemicals used,
completed the paper work, revised prices and other specific activities necessary for proper
inventory management.
Prepared new drilling fluid, as required, using special chemical recipes.
Cooperated with other service company personnel and with the drilliing crew in order to prevent
spillage, or other accidental dumping, of drilling fluid, or other dangerous substances or chemicals,
into the sea.
Trained new drilling fluids engineers.

July 1997 to December 1999

Sales drilling fluids engineer, M-I Overseas Ltd., Egypt Branch

Onshore operations in the Western Desert, Egypt. Offshore operations in the Mediterranean Sea off the coast of Israel. Broad experience in deep water drilling where the low ambient sea temperatures affect the behavior of different fluids. The duties performed were similar to those listed above.

April 1994 to June 1997

Sales drilling fluids engineer, M-I Drilling Fluids Romania.

Onshore operations, working for non-Romanian operators such as Shell and Amoco. The duties performed for these operators were similar to the ones listed above.

December 1988 to March 1994

Drilling Engineer, Prospectiuni S.A., a Romanian seismic research company.

Drilled seismic wells in cooperation with Destiny Drilling (Canada) on a joint Amoco-Shell project. Focused on the chemistry of drilling fluids.

August 1985 to November 1988

Drilling Engineer, Dafora Drilling Company (Romania).

Drilling supervisor on land operations. Focused ont he chemistry of drilling fluids. Prepared cementing jobs.

INDUSTRIAL SCHOOLS ATTENDED:

Hydrogen Sulphide Training, M-I Drilling Fluids Co., 2000.
Workplace Hazardous Material Information System (including Labels and Material Safety Data Sheets), M-I Drilling Fluids Co., 2000.
Basic Survival Training, M-I Drilling Fluids Co., 2000.
Brines and Integrated Fluids Engineering, M-I Drilling Fluids Co., 2000.
Drilling Fluids, M-I Drilling Fluids Co., 1994.
Completion Fluid Technology, M-I Drilling Fluids Co., 1994.
Quality Awareness, M-I Drilling Fluids Co., 1994.

COMPUTER LITERACY:

The writer is proficient with Microsoft Excel, Microsoft Word and Power Point as well as software specific to the oil and gas industry including One Trax, Envirolog and DIMS.